The panels are resistor welded from steel hot-dip galvanized rods, which are 5 mm or 4 mm thick and then protected by a plastic covering – an electrostatic powder coating and heated at 200 ºC. This process enables our panel fences to become completely protected against rust and they require no maintenance or painting as we provide rust-free guarantee for a period of 10 years, if no physical damage is caused to the fence (scratches, impacts). Panels can have various heights – 600 mm, 1000 mm, 1200 mm, 1500 mm, 1700 mm, 2000 mm, 2400 mm. According to their height, they are reinforced in their entire length with stamped V-shaped reinforcements adding strength and stability to the panel. The panels of 600 mm, 1000 mm and 1200 mm have 2 reinforcements; 1500 mm and 1700 mm have 3 reinforcements, while 2000 mm and 2400 mm have 4 reinforcements. The panel length is standardized – 2.5 m. Plastic coveting offers a wide selection of possibilities within the RAL color scale. Standard colors are green RAL 6005, which our clients prefer as it merges best with the surroundings of houses, gardens and parks, a standard selection are also shades of grey RAL 7015, 7035, 7040, which match modern business buildings and asphalt parking lots. For private residential houses, our customers most often choose the following heights: 1000 mm, 1200 mm and1500 mm; for decorative gardens 600 mm; and for business buildings 1700 mm and 2000 mm. Our fences are available in all colors within the RAL color scale. Our standard colors are green and gray, all other colors from the RAL color scale are available upon a previous order. Our panel fences are made from solid steel hot-dip galvanized rods (diameter 5 mm), where the application of zinc is min. 80g/m2. The fence panels are covered with plastic electrostatic powder coating and baked at 200 ºC. Our standard color is green RAL 6005, however, you can order your fence in any desired color from the RAL color scale. Glazing: according to standard (ISO 2813) at an angle 60,95%Adhesion: according to standard (ISO 2409) Durability: according to standard (EN 48252) more than 80.Thickness of the layer of applied rust resistant polyester is min. 120 micron.